IET
Decrease font size
Increase font size
Topic Title: Bootlace ferrule crimpee
Topic Summary:
Created On: 14 January 2019 09:06 am
Status: Read Only
Linear : Threading : Single : Branch
 Bootlace ferrule crimpee   - ben22 - 14 January 2019 09:06 am  
 Bootlace ferrule crimpee   - rocknroll - 14 January 2019 09:50 am  
 Bootlace ferrule crimpee   - wallywombat - 14 January 2019 10:10 am  
 Bootlace ferrule crimpee   - rocknroll - 14 January 2019 10:34 am  
 Bootlace ferrule crimpee   - geoffsd - 14 January 2019 01:24 pm  
 Bootlace ferrule crimpee   - sparkingchip - 15 January 2019 01:15 pm  
 Bootlace ferrule crimpee   - paulskyrme - 14 January 2019 01:33 pm  
 Bootlace ferrule crimpee   - perspicacious - 14 January 2019 01:58 pm  
 Bootlace ferrule crimpee   - paulskyrme - 14 January 2019 04:55 pm  
 Bootlace ferrule crimpee   - dustydazzler - 14 January 2019 01:57 pm  
 Bootlace ferrule crimpee   - tattyinengland - 14 January 2019 02:36 pm  
 Bootlace ferrule crimpee   - tattyinengland - 14 January 2019 02:37 pm  
 Bootlace ferrule crimpee   - ben22 - 14 January 2019 04:47 pm  
 Bootlace ferrule crimpee   - AJJewsbury - 14 January 2019 04:50 pm  
 Bootlace ferrule crimpee   - sparkingchip - 14 January 2019 11:50 pm  
 Bootlace ferrule crimpee   - paulskyrme - 15 January 2019 10:48 am  
 Bootlace ferrule crimpee   - mapj1 - 15 January 2019 01:11 am  
 Bootlace ferrule crimpee   - chrispearson - 15 January 2019 09:45 pm  
 Bootlace ferrule crimpee   - mapj1 - 15 January 2019 02:04 pm  
 Bootlace ferrule crimpee   - sparkingchip - 15 January 2019 02:58 pm  
 Bootlace ferrule crimpee   - paulskyrme - 15 January 2019 06:54 pm  
 Bootlace ferrule crimpee   - sparkingchip - 15 January 2019 08:25 pm  
 Bootlace ferrule crimpee   - mapj1 - 15 January 2019 09:25 pm  
 Bootlace ferrule crimpee   - wallywombat - 15 January 2019 11:18 pm  
 Bootlace ferrule crimpee   - sparkingchip - 23 January 2019 01:48 pm  
 Bootlace ferrule crimpee   - AJJewsbury - 23 January 2019 03:18 pm  
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 15 January 2019 09:25 pm
User is offline View Users Profile Print this message



mapj1

Posts: 12039
Joined: 22 July 2004

I agree, unless the wire is very thin, and so long as there is only one wire in the cage, a bare end is normally perfectly fine, to a large extent it is a matter of habit or 'house style'
We tend to put them on the end of everything that can take them, but that is because when you are making many of the same thing, the loom is prepared on a peg board, and laced, prior to installation so you need something to stop the numbers falling off. If it is not that sort of job, then it is less of an issue if the wires are being cut and fitted one at a time.

-------------------------
regards Mike
Statistics

New here?

  • To participate in discussions, please log in and introduce yourself.

See Also:



FuseTalk Standard Edition v3.2 - © 1999-2022 FuseTalk Inc. All rights reserved.

 
..